Hf-scientific Micro200BW Turbidimeter - 0-100 NTU Manual de usuario Pagina 56

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 57
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 55
MICRO 200 BW 0-10 & 0-100 NTU (05/05)
Rev. 3.4
LCD Liquid Crystal Display (screen) used to
Display view the information available on the
MICRO 200 BW.
Main Menu: The major options for each of the functions
accessed by the “FUNCTION” keys.
NTU: Nephelometric Turbidity Units
Self Test: A function that the MICRO 200 BW per-
forms to check the internal analyzer volt-
ages.
Set Alarm Setting the value at which an alarm will
Point: occur.
Set Selection of the time period used to aver-
Average: age the display. Used to mitigate rapidly
changing readings.
Set Time: Function used to Set the internal clock of
the MICRO 200 BW
Set Baud Set the RS-232 information transfer rate.
Rate:
Standardize: Calibration of the lowest value of water.
Sub Menu: Menu selections offered after selecting an
option from the main menu.
Select: A function that alternates among features
or selections.
Turbidity: The measurement of light reflected by
particles suspended in a fluid.
GLOSSARY
Alarms: Relay outputs that change when an alarm
setpoint has been exceeded.
Backwash: A method of measuring the transmission
of filter backwash water.
Baud: Rate of transfer of serial information.
Calibrate: Electronic adjustment of the instrument to
known standards.
Cursor: The LCD pointer indicating which digit or
figure will change.
Cuvette: Glass container used to hold the sample to
be measured. It is placed in the optical well
of the turbidimeter.
Comm Port: Serial RS-232 or RS-485 communications
port used for connecting a serial printer to
generate hard copies of measurements or
to data logging equipment.
D to A: Digital to analog conversion. Used to pro-
vide 4-20 mA and 0 - 10 V output signals.
Digit Up: Command indicating an increment or in-
crease of the digit selection.
Digit Down: Command indicating a decrement or de-
crease of the digit selection.
Display The set up of information to be displayed
Parameters: on the LCD display.
Display: LCD display screen on the Analyzer.
Frequency: The number of cycles per second (hertz),
of an alternating current signal.
FTU: Formazin Turbidity Units (see NTU)
Host A computer that is used to acquire and
Computer: collect information from the serial port of
one or more MICRO 200 BW analyzers
(up to 16, Ø through F, Hexametadecimal).
JTU: Jackson Turbidity Units
Page 44
Vista de pagina 55
1 2 ... 51 52 53 54 55 56 57

Comentarios a estos manuales

Sin comentarios